WarePanel 50
Integrated powder and liquid warewash dosing system
Introduction
WarePanel 50 is a complete dosing system designed to dispense powder detergent and liquid rinse aid into any kind of warewashing machine.
The unit features an integrated microprocessor dosing device, the WareDose 50 DL, and a solid hopper to dissolve the dry detergent to be injected in solution with water into the warewashing machine.
Operating modes and functions
• Password protection for programming)
• Operating mode programmable for single-tank or tunnel dishwashers
• Detergent solenoid valve opens depending on conductivity value
• Separate management of first charge
• Peristaltic rinse pump with adjustable speed or dosing time and programmable dosing time limit
• Three stored programmes that can be activated manually or at a pre-set time
• Programmable OFA time to signal alarm and eventually close the valve if the detergent concentration set point has not been reached within the set time interval
• Wide set of statistical data (including operating times and activations for each pump and conductivity value)
• Motor breakdown diagnosis to signal failure
LCD digital display v2 x 16 characters with backlight
Level control input for rinse pump, with the option to stop the pump or not when alarm occurs
Separate input triggers for 1st charge SV, wash pump and rinse SV
Conductive/inductive probe for accurate conductivity reading (200 μS - 10 mS or 1 mS - 50 mS)
Manual priming of the SV/pumps by buttons on the front label keypad
Features new PC front cover with easy opening and stop in open position
New ABS polished enclosure with easy opening by frontal keys
Three rollers and ball bearing on motor shaft ensure 20% high tube and motor lifetime
Corrosion-resistant plastic hinge not affected by corrosion
Vacuum switch option enables user to check chemical level, including for bag-in-box products
Integrated PP hopper for dry chemical dissolving in water
Solid PP panel ready for wall mounting
Interested in
WarePanel 50
?
Enquire today and speak to one of our sales representatives
Unlock SEKO Hub & see more resources
LoginSpecification
- Power: 100 - 240 Vac, 50 - 60 Hz
- Power consumption: 20 W
- Detergent pump flow rate: 1.4 - 9 l/h (Santoprene tubing)
- Rinse-aid pump flow rate: 0.2 - 1.5 l/h (SekoBril tubing)
- Pressure: 3 bar
- Ingress protection: IP65
- Electrical insulation: Clas II
